Open 24/7, no need to find parking & shipping within Europe is always on us!

Part 5 Bedroom Revamp & Reveal: the Bedside Click-In Table DIY

I really had the work cut out for me, wanting to make as much custom shelving & details as possible. 

First up a click in side table for the hubby with wireless charging, made from plywood and an edge painted on.

You need:

  • Wood of your choice (I used plywood as it had it available)
  • Wood glue
  • Nails or Nail gun
  • Clamps
  • Painters tape & paint
  • Circle saw attachment
  • Sandpaper

You can see in the picture below, how the left side of the bedside table is hooked into the actual bedframe, making it a part of the bed. 

The actual parts of plywood are glued together and supported by nails in all the joints. Then I simply taped it up and added a colourful edge aorund.

To cut out the circle for the wireless adapter (purchased from IKEA), I used a circle saw attachement for my electric drill and went to work.

Easy peasy!

Thanks for following along & also make sure to check out the other parts of my bedroom revamp & reveal series.

Part 1 Bedroom Revamp: The Round UP

Part 2 Bedroom Revamp: The DIY Wooden Headboard

Part 3 Bedroom Revamp: The DIY Wood Bedframe - The Simple Way

Part 4 Bedroom Revamp: The IKEA Rast Hack. Dresser turned TV stand!

Part 6 Bedroom Revamp & Reveal: DIY Surfboard Peg Shelf

Part 7 Bedroom Revamp & Reveal: The DIY Plywood Sun Lamp

Leave a comment

Please note, comments must be approved before they are published